We’re no strangers to wanting to keep our tech in the nicest possible condition. We’ve created the Velo 2 Silicone Case and Anti-Glare Screen Protector with this in mind!
Available in Black, Alpine Green, or Ultramarine, the Protection Pack will ensure your Velo 2 can face all the adventure you can throw at it whilst keeping scuffs and scratches at bay.
Installing them is simple! Note: ensure that you install the screen protector before installing the silicone case!
First, install the Screen protector:
Clean the screen thoroughly:
Use a slightly damp cloth, or ideally an alcohol-based screen cleaning wipe, to remove any grease and dirt from the screen.
Dry with a microfiber cloth
Use an air duster or piece of tape to remove any leftover particles.
Align the screen protector
Without peeling the backing yet, hover the screen protector over your device.
Line it up so that there is equal distance between the edge of the device and the edge of the screen protector. You can use the small ‘notch’ at the bottom of the display as a guide – the bottom edge of the protector should sit right next to this, but not over it (see image below).
Peel the backing and apply
Slowly peel off the backing to expose the adhesive.
Carefully align and place the protector on the screen starting from one edge.
Let it naturally fall into place.
Smooth out bubbles
Gently push out any air bubbles from the center toward the edges.
For stubborn bubbles, lift the edge of the protector slightly and reapply.
Next, install the silicone case:
Find the USB port bung on the case – it’s the small flap on the opposite side to the Beeline logo.
Start installing the case by pushing the bung into the USB-C port on the Velo 2. This helps ensure everything is properly aligned.
Push down the rest of the case onto the device, working your way around from the bottom to the top.
Ensure that everything is pushed into place and correctly aligned.
It should be as simple as that! Now you’re set to get off to riding with a bit more protection (and what we think is a pretty cool new colour on your bars, if you’ve chosen that, too) 😎
Need help? Contact us here.