Watch our video on how to pair your Beeline Velo 2 with your iPhone or Android phone:
Or read our step by step instructions here:
** The number one thing to remember! When pairing, do not attempt to pair your Beeline to Bluetooth in Bluetooth settings. Make sure you pair and set up your device through the Beeline app.**
Follow these steps to pair with your Beeline:
Open the Beeline app and go through the onboarding screens. It will ask you if you would like to pair to a Beeline device
If your Velo 2 has nothing on the display, hold the bottom button for 3 seconds to turn it on. At the bottom of the screen, you’ll see a four-character ID in a white box (e.g. AB12).
In the Beeline app, select the correct device ID and allow your phone to pair. Make sure to follow any pairing prompts your phone gives you, and enable any permissions required. Your Velo 2 will download any firmware updates and then you should be good to go!
How to unpair your Beeline Velo 2:
If you would like to unpair your Beeline Velo 2 from your phone, just go to the 'settings' tab in the Beeline app and tap ‘unpair’.
If you need to unpair your Velo 2 but don’t have access to the phone that you’ve paired it to, you can unpair the device by going to the ‘Options’ menu, then selecting ‘Unpair’ and following the prompts. Once the device is unpaired, it will be reset and you’ll be able to pair it with a different phone.
If you would later like to re-pair with your Beeline, you will need to 'forget' it in your phone's Bluetooth Settings menu. This is very important on iOS. To do this on your iPhone, head to Settings > Bluetooth, then on the list titled ‘My Devices’, scroll until you find your Beeline device. Once you’ve found it, tap the blue info icon, then select Forget this device (see below).