You can attach your Beeline Velo 2 to either your handlebars or your bike stem with the universal bar mount included in the box. 



Choose between the smaller or larger silicone bands depending on your handlebar or stem diameter. The bands are suitable for bars from 24-36mm in diameter. Before you put the mount on the bar, attach one end of each band to the pegs with narrower band gaps. You might need to pull the bands quite hard to get them through the gap. These tighter band gaps ensure that can easily remove and reattach the mount without the bands flying away. 

Once the mount is ready, simply pull each band underneath the bar and slip it into the peg on the diagonal opposite side. After that, simply twist the device into the mount and you’re ready to go!