The Fork Stem Mount is perfect for motorcycles with ‘clip-on’ type bars (typically sports bikes and café racers). The base fits into the central hole in a fork stem. You can choose to mount the device flush with the bars or use the included modular parts to adjust the angle and position of the device.
What’s included:
Fork Stem Mount (including 2.5mm hex, M4 x 40mm centre screw)
Small spacer (12mm to 18.5mm diameter)
Large spacer (18.5mm to 25.4mm diameter)
Modular Mount Extender kit
Modular mount insert adapter
Modular mount extension arm
Modular mount head
Other tools you’ll need:
2.5mm hex key
4 mm hex key
We’ve chosen not to include hex keys to reduce waste. If you don’t have one of these already, please visit beeline.co/hex-keys.
To install your Fork Stem Mount:
This mount gives you freedom to decide how you want to position the Moto II. You can set it up in the following ways, depending on your bike setup and desired device position:
A: Install with Modular Extension Kit. This allows the device to be articulated and positioned offset from the fork stem tube if desired. You can choose to install with or without the extension arm.
B: Install flush with bars (without Modular Extension Kit). This gives a clean look, but with less adjustability than Option A. You will need to remove the mount insert from the Modular Extension Kit and place directly into the mount insert cavity in the Fork Stem base (see diagram in step 2 below).
Prepare your bike's fork stem. Firstly, ensure you remove any caps or covers that might be in the way of the stem tube you wish to install the mount into. Check that the inside surface is clean – you may want to clean it with degreaser before install to ensure the mount can grip firmly.
Measure the fork stem tube diameter, select and fit the larger or smaller spacer before installing the mount. Slightly tighten the main insert screw to ensure the mount parts stay together during install. See the diagram below for how the parts should be assembled:
Once you have chosen your setup, insert the fork stem mount into the fork stem tube. Tighten the main insert screw with a 2.5 mm hex key to secure the mount into place:
As you tighten the screw into place, the spacer within the stem of your mount will expand, securing the mount in place.
If installing with the Modular Extension Kit, add the optional extension arm and/or the modular mount head. Use a 4 mm hex key to loosen and tighten the bolts to adjust the position of the mount. If installed in an offset position, rotate the mount insert so that the device is pointing forwards.
Pop in your Beeline, and you're ready to ride!
Notes:
The modular extender part has a feature for neatly attaching a zip tie to neaten up the Powered Mount Insert cable if that accessory is installed.
2.5 mm & 4 mm hex keys required for install, not included. Not compatible with Moto II Universal Mount or Original Beeline Moto mounts. Compatible with Moto II devices, or with original Moto devices using the Original Moto to Moto II Mount Adapter.