Fully adjustable and with a removable extender arm, this kit adds extra height and flexibility to Moto II mounts*. Whether you are looking to mount your Beeline from the stem, to the dash, to the mirrors and beyond, the Mount Extender kit will help you achieve the exact position you're looking for.
Please note: this is not a standalone mount. This kit must be used with compatible Beeline Moto II mounts.
This kit also enables you to build your own custom setup by combining it with action camera mounts. GoPro combos are a go if your heart so desires!
Below in the right-hand image, you can see an example of the Extender Kit in use with a Bar Clamp Mount and Powered Mount Insert, making use of the extension arm's built-in cable routing feature.
* This kit is not compatible with Original Moto mounts or Moto II universal mounts
What’s included:
Modular mount insert adapter
Modular mount extension arm
Modular mount head
Other tools you’ll need:
2.5mm hex key
4 mm hex key
We’ve chosen not to include hex keys to reduce waste. If you don’t have one of these already, please visit beeline.co/hex-keys.
To install your Modular Mount Extender kit:
Prepare your existing Beeline Moto II mount. Remove the mount insert - retaining the screw.
Replace the existing mount insert with the modular mount insert adapter. Tighten the screw to secure the insert into place.
Now add the optional extension arm and/or the modular mount head.
Use a 4 mm hex key to loosen and tighten the bolts to adjust the position of the mount. If installed in an offset position, rotate the mount insert so that the device is pointing forwards.
Pop in your Beeline and you're ready to ride!
Notes:
The modular extender part has a feature for neatly attaching a zip tie to neaten up the Powered Mount Insert cable if that accessory is installed.
This mount is very similar to the Original Beeline Moto Sticky Pad Mount. However, this updated mount been redesigned to be significantly stronger and resistant to vibration, UV and exposure to the elements. Combining this mount kit with the 4-Hole AMPS mount creates a similar setup to the original Sticky Pad Mount.