Compatible with a wide variety of 1-inch ball mounts and clamps, this adapter allows you to easily position your Moto II with unmatched flexibility.
Note: This mount does not include the 1" ball clamp or base ball that must be attached to the bike. These are sold separately.
Other tools you’ll need:
2.5mm hex key
4 mm hex key
We’ve chosen not to include hex keys to reduce waste. If you don’t have one of these already, please visit beeline.co/hex-keys.
To install your Ball mount:
Loosen the ball clamp, ensuring anything it might currently be holding does not fall.
Insert the ball mount into the clamp and tighten the clamp until it holds the mount firmly in place.
If necessary, loosen the clamp to adjust the mount's angle, tightening once more to lock it into place.
You may also want to adjust the angle of the mount's head piece to orient your Beeline into the perfect viewing position. You can do this by loosening the mount's side screw with a 4 mm hex key, adjusting the tilt, then tightening it again to lock in the angle.
Pop in your Beeline, and you're ready to ride!