Replacement bands for Universal Mount
Please find the link to our replacement bands here. This product includes 2 x small bands and 2 x large bands in the pack. Silicone bands suitable for diameters ranging from 22-36mm. These are compatible with universal mounts for all devices.
For the main Universal Mount part (the hard piece that the device clips into), you can find replacements in the links below:
Replacement shims for your Moto mounts
We provide rubber shims for some of our motorcycle mounts. They are custom designed silicone parts that reduce vibration, and provide a snug, non-slip fit between the mount and the motorcycle frame or component. It also enables our mounts to be compatible with different size handlebars
We do not directly sell spare shims, but if you need some, please do get in touch with the customer support team here. They will be happy to send some out to you for a small fee.
Mount insert replacements for Original Moto and Moto II
These can be purchased on our website!
Mount screw replacements
All replacement screws can be found in the links tied to the screw sizes below.
Note: we recommend applying threadlock (e.g. Loctite 243) to all replacement screw and bolt threads before assembly. We apply this on all factory fixings to help prevent threads loosening due to vibration.
Moto II Mounts
Moto II Bar Clamp Mount
Moto II Bar Clamp Mount
2 x screws for installation:
1 x M3 x 12 mm (socket head) - note, this is incorrectly labelled as “M4 x 12mm” in the install guide on early production units
Please see the diagram below, which shows which screws are used and where they are located on the mount.
Moto II Mirror and Crossbar Mount
Moto II Mirror and Crossbar Mount
Screws required for installation:
Please see the diagram below, which shows which screws are used and where they are located on the mount.
*Note: the first batch of these mounts will come alongside a replacement screw to replace the existing one present in the mount which had a thread which was too short. Please replace it accordingly.
Moto II Powered Mount Insert
Moto II Powered Mount Insert
Screws required for installation:
Extended mount insert bolt – the correct bolt should be selected depending on which mount the Powered Insert is being installed onto.
M4 x 18 mm (countersunk)
or
M4 x 22 mm (countersunk)
See the diagram below, which shows which screws are used and where they are located on the mount.
Moto II Modular Mount Extender Kit
Moto II Modular Mount Extender Kit
Screws required for installation:
Moto II Fork Stem Mount
Moto II Fork Stem Mount
Screws required for installation:
1 x M4 x 40 mm (countersunk) centre screw
If using the extender kit:
See the diagram below, which shows which screws are used and where they are located on the mount.
Moto II 4-hole AMPS Mount
Moto II 4-hole AMPS Mount
Screws required for installation:
Note that bolts for attaching this mount onto an AMPS plate are not included. These are typically M5 screws.
See the diagram below, which shows which screws are used and where they are located on the mount.
Velo 2 Mounts
Velo 2 Stem Cap Mount
Velo 2 Stem Cap Mount
Screws/bolts required for installation:
M6 x 30 mm (cap head) head stem cap bolt
2 x M3 x 8 mm (countersunk) mount adapter insert screws
See the diagram below, which shows which screws are used and where they are located on the mount.
Velo 2 Mount Adapter Insert
Velo 2 Mount Adapter Insert
Screws required for installation:
2 x M3 x 8mm countersunk mount adapter insert screws
See the diagram below, which shows which screws are used and where they are located on the mount.
Original Moto Mounts
Original Moto Sticky Pad Mount
Original Moto Sticky Pad Mount
Screws required for installation:
2 x M5 x 16 mm + nut
1 x M3 x 5 mm Philips head screw with a flat, pan head
Original Moto Bar Clamp Mount
Original Moto Bar Clamp Mount
Screws required for installation:
2 x M3 20 mm hex head
1 x M3 x 5 mm Philips head screw with a flat, pan head
Original Moto 1-inch Ball Adapter Mount
Original Moto 1-inch Ball Adapter Mount
Screws required for installation:
1 x M5 + nut
1 x M3 x 5 mm Philips head screw with a flat, pan head
Original Moto Scooter Mirror Stalk Mount
Original Moto Scooter Mirror Stalk Mount
Screws required for installation:
2 x M3 18mm hex head
1 x M3 x 16 mm w/7mm Philips head with flat, pan head inc. custom nut and circlip